2-芳胺基-5-[5′-氨基-1′-(4″-氯苯基)-1′,2′,3′-三唑-4′-基]-1,3,4-噻二唑的合成~≠

1-[5’-氨基-1’-(4”-氯苯基)-1,2,3-三唑-4’-甲酰基]-4-芳基-3-氨基硫脲在浓硫酸催化下环化得到2-芳胺基-5-[5’-氨基-1’-(4”-氯苯基)-1’,2’,3’,-三唑-4’-基]-1,3,4-噻二唑2a～i,依次法合成了九个标题化合物,收率为30～74％。化合物2i的结构用X-光衍射单晶分析确证。     

维生素B类药物在薄层原位的近红外付立叶变换表面增强拉曼光谱

维生素Ｂ类药物在薄层原位的近红外付立叶变换表面增强拉曼光谱汪瑗，于秉正张煦（首都师范大学分析测试中心北京１０００３７）（北京大学分析测试中心北京）关键词维生素Ｂ_１，维生素Ｂ_２，薄层色谱，表面增强拉曼散射，近红外付立叶变换拉曼光谱将薄层色谱（ＴＬＣ）...     

Reaction of 1,5-diaryl-3-hydroxy-4-methylsulfonyl-3-pyrrolin-2-ones with urea,hydrazine, ethylenediamine,and <Emphasis Type="Italic">o</Emphasis>-phenylenediamine

With urea 1,5-diaryl-3-hydroxy-4-methylsulfonyl-3-pyrrolin-2-ones form the 3-amino derivatives of pyrrolones. In reactions with hydrazine hydrate and ethylenediamine the corresponding salts are formed. With ethylenediamine at 180–185°C the double salt of 3-hydroxy-4-methylsulfonyl-1,5-diphenyl-3-pyrrolin-2-one forms N,N′-di(4-methylsulfonyl-1,5-diphenyl-3-pyrrolin-2-on-3-yl)-ethylenediamine. The reaction with o-phenylenediamine gives 2,3-diaryl-4-methylsulfonylpyrrolo-[2,3-b]quinoxalines. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, 1631–1636, November, 2007.     

ZnO对Ag/SiO2催化剂银的分散作用及对吲哚合成稳定性的影响

将ZnO助剂加到由苯胺和乙二醇一步合成吲哚的Ag/SiO2催化剂中,发现ZnO助剂能大大提高催化剂的稳定性.XRD和TEM表征首次得到:ZnO是结构型助剂,它能使银很好地分散在SiO2表面上,并可有效地抑制反应过程中银粒子的烧结.     

苯与丙烯烷基化失活沸石催化剂氢再生机理

对工业中试用于苯与丙烯烷基化失活β－沸石改性催化剂进行了H2再生研究。通过对失活、新鲜和再生后催化剂的TPO、TPD、孔结构测定和活性评价以及失活和再生催化剂样品上炭组成的GC－MS分析，讨论了H2再生后催化剂催化性能的恢复状况。解释了虽然仍有部分炭未被除去，但酸性和活性恢复良好的原因。提出了本文体系失活催化剂H2再生过程的作用机理。     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

Water/Oil Biphasic Hydroformylation of Higher Olefins over a TPPTS-Rh/SiO2 Catalyst

A novel TPPTS-Rh/SiO2 catalyst, prepared by directly modifying a heterogeneous highsurface-area Rh/SiO2 catalyst with water-soluble TPPTS ligands, could decrease the resistance of mass transfer in water/oil biphasic media for the hydroformylation of higher olefins. The catalytic performance for hydroformylation on this biphasic TPPTS-Rh/SiO2 catalyst system was higher than those of the traditional biphasic HRhCO(TPPTS)3 systems, owing to the chemical bonds between the highly dispersed Rh metal particles and the TPPTS ligands. The catalyst system is applicable for hydroformylation of higher olefins such as 1-dodecene.     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

Highly regio- and stereocontrolled SN2′ reactions of gem-difluorinated vinyloxiranes with monoalkylcopper reagents

Reaction of gem-difluorinated vinyloxiranes with RCu(X)Li allowed us to introduce the R group regioselectively at the fluorine-attached terminal carbon atom in an S_N2′ manner to afford (E)-allylic alcohols exclusively, while homoallylic alcohols with anti stereochemical relationship were found to be obtained selectively from higher-ordered cuprates derived from CuCl and RMgBr in a ratio of 1:3.